RSS Feed
Knowledgebase : WatchGuard Technologies > Watchguard Features and Functions
   

How can I use tunnel switching to route VPN traffic between two Branch Office VPN tunnels? [WSM/Fireware XTM v11.x] When you connect two or more remote Branch Office VPN (BOVPN) tunnels to your network, you must configure tunnel switching if you want...
Use an existing configuration file when you upgrade to a new XTM device [Fireware XTM v11.4.x] To use an existing configuration file for a new XTM device, you must first configure the new XTM device with a basic configuration. Then you can save ...
Load a Microsoft Signed Certificate [XCS v9.x] To load a Microsoft Signed Certificate: On the WatchGuard XCS, select Administration > System > SSL Certificates. Make sure you change the size of the certificate's public key to 1024bit or...
About Outlook/Exchange through the Firebox [WFS] Basic Description Sometimes Outlook Web Access is not an option for remote Exchange server access, or you have an Exchange server on the optional interface and clients on the trusted interface. Direct...
About POP3 through the Firebox Basic description POP3 is a plaintext protocol designed to allow mail clients to retrieve mail from a mail server. Most mail servers and clients are able to use POP3. This protocol is designed to allow clients to retri...
How to recognize spam. Generally, there are a few indicators which can help you identify spam (unsolicited bulk emails) in your mailbox. If a message fulfills some of the following criteria, it is most likely spam. The sender address does not belo...