RSS Feed
Knowledgebase : WatchGuard Technologies > Watchguard Installation Issues
   

Configure port forwarding [Fireware XTM v11.x, Fireware v10.x] Network Address Translation (NAT) describes any of several forms of IP address and port translation. At its most basic level, NAT changes the IP address of a packet from one value to a di...
How do I restore the Edge e-Series to the factory default settings? [WSM/Fireware XTM v11.x] If you have a configuration problem that you cannot correct, you can restore the factory default settings and start with a new configuration file. For exampl...
You can use the Web Setup Wizard to set up a basic configuration on any Firebox X e-Series or WatchGuard XTM device. The Web Setup Wizard automatically configures the Firebox or XTM device for mixed routing mode. To use the Web Setup Wizard, you mus...
Can I use two versions of WatchGuard System Manager on the same management computer? [WSM/Fireware XTM v11.x] The WatchGuard System Manager (WSM) installer installs the WatchGuard System Manager management software, and optionally installs the WatchGuar...
I have DSL service and my ISP uses PPPoE [WFS] Many ISPs are moving toward PPPoE (PPP over Ethernet) as a means of authenticating and tracking usage on their network. While this gives more configuration flexibility on the ISP's part, it can be troubles...